In recent years, due to the advancement of equipment technology, the development of cylinder machines has been very mature. It is deeply loved by friends in the industry. Therefore, more users choose the cylinder machine. Below, the editor will introduce to you the problems encountered when using the machine and how to solve it correctly.

The incision is bursting or uneven

1. Trimming or cracking: Because the material is too fragile, you need to order barrel material when ordering. Change the cutting knife to a pulling knife, insert the knife carefully, stop rotating, hold the blade with your hand, and scrape the blade onto the blade, that is, This problem can be solved.

2. The cuts are uneven; you must pay attention not to make the cutting die gap too large or the die to be too small. You need to roll several more layers of fabric to flatten the material to avoid uneven cuts.

3. The roller is not precise, the technology is not up to standard, and the gap between the cutting pieces is too large.

The knife does not cut

1. The carbon brush has poor contact. It is possible that the carbon brush has reached its limit and needs to be replaced. Poor contact is caused by the friction between the carbon brush and the turntable, and there will also be some dust-like foreign matter attached. If this happens, you can use a towel or fine sandpaper to wipe it clean.

2. Check the cutting time set by the displayed parameters. Please set the reference value of the cutting time: from 0.35 to 0.6. A value of zero means no cutting.

3. The cutting electromagnet is damaged. It is a loss part and will have a certain service life. The main problem is that the cutting electromagnet has no power. In this case, a way to replace the finishing machinery of the cylinder manufacturer must be found, because this These are parts that need to be customized and are generally not available in the market.